A-A-58004F
e. Winterization schematic.
f. Fuel schematic.
g. Schedules for required preventative maintenance and required periodic maintenance.
h. Location, procedure, and interval for parts of the truck and equipment that require
lubrication.
2.1.8.1.3 Parts manual. The parts manual shall include illustrations and exploded views, as
needed, to properly identify all parts, assemblies, subassemblies, and special equipment. All
components of assemblies shown in illustrations or exploded views shall be identified by
reference numbers that correspond to the reference numbers in the parts lists. All purchased parts
shall be cross-referenced with the original manufacturer's name and part number. The parts
identification manual shall provide the description and quantity of each item used per vehicle.
The size, thread dimensions, torque specifications, and special characteristics shall be provided
for all nonstandard nuts, bolts, screws, washers, grease fittings, and similar items. The manual
shall contain a numerical index. The parts manual shall contain a list of all of the component
vendor names, addresses, and telephone numbers referenced in the parts list.
2.1.9 Painting, plating, and corrosion control.
2.1.9.1 Dissimilar metals. Dissimilar metals, as defined in MIL-STD-889, shall not be in contact
with each other. Metal plating or metal spraying of dissimilar base metals to provide
electromotively compatible abutting surfaces is acceptable. The use of dissimilar metals
separated by suitable insulating material is permitted, except in systems where bridging of
insulation materials by an electrically conductive fluid can occur.
2.1.9.2 Finish. Exterior surfaces shall be prepared, primed, and painted with polyurethane paint
in accordance with all of the paint manufacturer's instructions and recommendations. Unless
otherwise specified (see 6.2), the exterior finish color shall be Candy Apple Red, Sikkens Color
Number FLNA3021, DuPont Color Number 97902U or 4737U, PPG Color Number 71528 (the
PPG name for this color is Cardinal Red), or equal. When specified, the exterior finish color
shall be Desert Sand, Color Number 30313 of FED-STD-595. The interior of all compartments
shall be painted with an impact resistant, textured coating that resists stains, scuffs, chips, and
scratches.
a. For vehicles painted Candy Apple Red, the cab upper body (from the bottom of the
windshield) and roof shall be painted White, Color Number 17875 of FED-STD-595.
All bright metal and anodized parts, such as mirrors, horns, light bezels, treadplate,
and roll-up compartment doors, shall not be painted. Compartment interiors shall be
gray.
b. For vehicles painted Desert Sand, all exterior surfaces, excluding all normally bright
metal and anodized parts and any interior surfaces visible with any compartment door
open (but not the interior of the cab), shall be painted the color of the body. This
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business