A-A-58004F
2.4.10 Auxiliary power receptacles. The tanker shall have 2 12-volt auxiliary power receptacles
mounted adjacent to the driver and crew member positions, preferably in the instrument panel or
in a center radio mounting console.
2.5 Driving and crew areas.
2.5.1 Cab. The tanker shall have a two person, two door, non-tilting cab. A tilt steering column
shall be provided. A vehicle data recorder shall be provided in accordance with 4.11 of NFPA
1901. Provisions must be made for fire helmet storage for all seated positions in accordance
with 14.1.8 and 14.1.11 of NFPA 1901.
2.5.1.1 Seats. The truck shall have seats in accordance with NFPA 1901. The driver's seat shall
be of an adjustable air suspension design. The crew member seats shall be of a non-suspension
design. Each crew member seat (excluding the drive position) shall have a backrest, brackets,
and pad covers designed to store a one-hour capacity SCBA. Each seat shall be provided with a
Type 2 seat belt assembly (i.e., 3-point restraint) in accordance with 49 CFR 571.209. All seats
shall be equipped with a seat belt sensor in compliance with 14.1.3.10 of NFPA 1901.
2.5.1.2 Cab interior sound level. The maximum sound level at any seat location shall not exceed
90 dBA without any warning devices in operation, as measured in accordance with 49 CFR
393.94(c), "Vehicular interior noise levels test procedure," except that the test shall be performed
with the vehicle traveling at a steady speed of 45 mph on a level, hard, smooth surface road.
2.5.1.3 Windshield and windows. The windshield and windows shall be of tinted safety glass in
accordance with industry standards.
2.5.1.4 Heated Mirrors. Outside rearview mirrors shall be installed on each side of the cab,
mounted on fold-back brackets. The mirrors shall also have electrically heated heads. Mirror
heating controls shall be located on the instrument panel within reach of the seated driver.
2.5.1.5 Climate control system. The manufacturer's standard heater/defroster and air conditioning
system shall be provided.
2.5.1.6 Instruments and controls. Gauges shall be provided for oil pressure, coolant temperature,
and automatic transmission temperature. All switches and/or controls that activate systems or
system components shall be labeled as to their function. In addition to the instruments and
controls required by 14.3.6 of NFPA 1901, the following shall be provided within convenient
reach of the seated driver:
a. Master warning light control switch,
b. Work light switch(es), and
c. Compartment "Door Open" warning light and intermittent alarm that sounds when a
compartment door is open and the parking brakes are released or the transmission is
in any position other than neutral.
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business