A-A-58028D
e. Schedules for required preventative maintenance and required periodic maintenance.
f. Location, procedure, and interval for parts of the truck and equipment which require
lubrication.
2.1.8.1.3 Parts manual. The parts manual shall include illustrations and exploded views, as
needed, to properly identify all parts, assemblies, subassemblies, and special equipment. All
components of assemblies shown in illustrations or exploded views shall be identified by
reference numbers which correspond to the reference numbers in the parts lists. All purchased
parts shall be cross-referenced with the original manufacturer's name and part number. The parts
identification manual shall provide the description, length, dimensions, and quantity of each item
used per vehicle. The manual shall contain a numerical index. The parts manual shall contain a
list of all of the component vendor names, addresses, and telephone numbers referenced in the
parts list.
2.1.9 Painting, plating, and corrosion control.
2.1.9.1 Dissimilar metals. Dissimilar metals, as defined in MIL-STD-889, shall not be used in
intimate contact with each other.
2.1.9.2 Finish. Exterior surfaces shall be prepared, primed, and painted with polyurethane paint
in accordance with all of the paint manufacturer's instructions and recommendations. Unless
otherwise specified (see 6.2), the exterior finish color shall be Candy Apple Red, Sikkens Color
Number FLNA3021, DuPont Color Number 97902U or 4737U, PPG Color Number 71528 (the
PPG name for this color is Cardinal Red), or equal. When specified, the exterior finish color
shall be Desert Sand, Color Number 30313 of FED-STD-595.
a. For vehicles painted Candy Apple Red, the cab upper body (from the bottom of the
windshield) and roof shall be painted White, Color Number 17875 of FED-STD-595.
Compartment interiors shall have a standard commercial finish. All bright metal and
anodized parts, such as mirrors, horns, light bezels, and tread plates, shall not be painted.
Roll-up compartment doors may be painted or unpainted.
b. For vehicles painted Desert Sand, all exterior surfaces, excluding all normally bright
metal and anodized parts and any interior surfaces visible with any compartment door
open (but not the interior of the cab), shall be painted body color. This includes
compartment shelves and mounting hardware, but does not include items mounted in the
compartments. Non-metallic materials may be black or gray.
2.1.9.3 Reflective stripes. Vehicles shall be uniformly marked with reflective striping to comply
with the surface area of coverage as prescribed by, and 15.9.3 of NFPA Standard 1901,
Automotive Fire Apparatus. Perimeter horizontal striping will be located below the body
centerline, covering at least 60 percent of the length (or as space permits) of each facing surface
(length or width). Bright metal trim or anodized parts may interrupt the reflective stripes. The
pattern shall be a 7-inch pattern: 1-inch stripe, 1-inch body color, 3-inch stripe, 1-inch body
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business