A-A-58028D
393.94(c), "Vehicular interior noise levels test procedure," except that the test shall be performed
with the vehicle traveling at a steady speed of 45 mph on a level, hard, smooth surface road.
2.4.1.4 Windshield and windows. The windshield and windows shall be of tinted safety glass in
accordance with industry standards.
2.4.1.5 Heated Mirrors. Combination flat and convex outside rearview mirrors shall be installed
on each side of the cab, mounted on fold-back west coast style brackets. The flat mirrors shall be
of the motorized remote control type, providing not less than 60° horizontal rotational viewing
range. The flat mirrors shall also have electrically heated heads. Mirror remote and heating
controls shall be located on the instrument panel within reach of the seated driver.
2.4.1.6 Climate control system. The manufacturer's standard heater/defroster system shall be
provided. The manufacturer's standard air conditioning system shall also be provided. In 100° F
ambient temperature with 50 percent relative humidity and at maximum compressor speed, the
air conditioning system shall cool the fully occupied cab to 75° F within 30 minutes. For the
purposes of air conditioner design, the work station electrical load is 500 watts each.
2.4.1.7 Instruments and controls. All instruments, controls, switches, and gauges shall be clearly
labeled. Gauges shall be provided for oil pressure, coolant temperature, and automatic
transmission temperature. In addition to the instruments and controls required by 14.3.6 of NFPA
1901, the following shall be provided within convenient reach of the seated driver:
a. Master warning light control switch,
b. Work light switch(es), and
c. Compartment "Door Open" warning light and intermittent alarm that sounds when a
compartment door is open and the parking brakes are released or the transmission is in
any position other than neutral.
2.5 Body, compartments, and equipment mounting.
2.5.1 Body. The vehicle shall have a body constructed entirely of non corroding materials.
The body shall be at least as strong as if it were constructed of 0.125 inch thick aluminum.
A copy of the fire apparatus manufacturer's warranty shall be included with the bid. The
warranty shall state that the body shall be free of structural failures caused by defective
design or workmanship for a warranty period of fifteen (15) years from the date the new
vehicle is first delivered or 100,000 miles, whichever occurs first, and that defective parts
under the warranty shall be repaired or replaced without charge to the original purchaser.
2.5.2 Compartments. The utility body shall have side, rear, and roof compartments with a
minimum of 700 cubic feet of enclosed storage space. Floors for side and rear compartments
shall be accessible to crew members standing on the ground. The compartment floor areas shall
support a minimum load of 1,000 pounds without permanent deformation.
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business