A-A-58005C
2.2.4.1 Fire hose and nozzles. The vehicle shall be designed to accommodate all items listed in
8.8.2 and 8.8.3of NFPA 1901. The fire hose and nozzles shall not be provided with the vehicle.
The vehicle shall have compartment space for the full complement of equipment, listed in 8.5
8.7 of NFPA 1901. The self-contained breathing apparatus (SCBA), the spare SCBA cylinders,
and the Automatic External Defibrillator shall be provided by the purchaser. Two individual
compartments, or a two bottle rack in a compartment, shall be included for two purchaser
provided one hour capacity SCBA air bottles.
2.2.4.2 Chocks. Two folding wheel chocks and mounting hardware shall be provided as loose
equipment. The wheel chocks shall hold the apparatus, when loaded to its GVWR or GCWR, on
a hard surface with a 20 percent grade with the transmission in neutral and the parking brake
released.
2.3 Chassis and vehicle components.
2.3.1 Engine. The truck shall have a diesel engine that is certified to comply with the
Environmental Protection Agency (EPA) on-highway emission requirements at the time of
manufacture. The engine shall run on Ultra Low Sulfur Diesel Fuel unless otherwise specified
(see 6.2).
2.3.1.1 Fuel filters. Primary and secondary fuel filters and a fuel/water separator shall be
provided. The fuel/water separator shall include a water coalescer and a drain valve, and shall be
in accordance with SAE J1839. A combination fuel filter and fuel/water separator may be
provided. Fuel filter elements shall be replaceable without loss of engine prime.
2.3.2 Exhaust system. The exhaust system outlet(s) shall be directed away from personnel
accessing equipment compartments.
2.3.3 Brake system. The vehicle shall be equipped with an all-wheel antilock brake system; the
brakes shall be fully air-actuated. Brakes shall be in accordance with Code of Federal
Regulations (CFR) 49 CFR 393.40 through 393.42(b)), 393.43, and 393.43 through 393.52. The
braking system complete with all necessary components shall include:
a. Air compressor having a capacity of not less than 12 standard cubic feet per minute
(scfm).
b. Air storage reservoir(s), each tank equipped with drain, and with safety and check
valves between the compressor and the reservoir tank.
c. Automatic moisture ejector on air storage reservoir.
d. Automatic slack adjusters on cam brakes or internal self-adjusting brakes on wedge
and disc brakes on all axles.
e. Spring set parking brakes.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business