A-A-58003 Truck, Fire Fighting \(Structural, 4X2 Or 4X4\)This commercial item description \(CID\) covers a structural pumper truck. It has a 4x2 or 4x4 chassis; a diesel engine and automatic transmission; a cab to accommodate at least five seated persons with at least four doors; a 1,250 gallon per minute \(gpm\) fire pump; a 500 gallon minimum capacity water tank; utility equipment compartments; and fire hose. The structural pumper truck is intended to combat structural, wildland, urban interface, and similar type fires.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21

A-A-58003F

a. NOMENCLATURE

b. MANUFACTURER'S MAKE AND MODEL

c. MANUFACTURER'S SERIAL NUMBER

d. USAF VEHICLE REGISTRATION NUMBER

e. NATIONAL STOCK NUMBER (NSN)

f. VEHICLE CURB WEIGHT: kg (pounds)

g. PAYLOAD, MAXIMUM: kg (pounds)

h. GROSS VEHICLE WEIGHT (GVW): kg (pounds)

i. FUEL CAPACITY AND TYPE: gal (gallons) / L (liters)

j. DATE OF DELIVERY (month and year)

k. WARRANTY (months and km (miles))

l. CONTRACT NUMBER

m. PAINT COLOR AND NUMBER

n. LENGTH, WIDTH, AND HEIGHT OF VEHICLE IN INCHES AND

CENTIMETERS.

2.1.11 Delivery. All units shall be delivered via flatbed.

2.2 General requirements.

2.2.1 Hose storage.

2.2.1.1 Hose storage area. The vehicle shall have a hose bed, with a removable and secured hose

bed cover and two adjustable dividers, capable of carrying 1,000 feet of 5-inch hose and 800 feet

of 3-inch hose.

2.2.1.2 Speed lay hose beds. The vehicle shall have two speed lay hose beds with one or more

removable and secured hose bed covers. Hose bed covers will be red for vehicles painted Candy

Apple Red and tan for desert sand vehicles. The hose beds shall be capable of carrying 200 feet

of 1�-inch pre-connected hose each. Sufficient clearance shall be provided between the hose

and cover to allow a pre-connected hose nozzle to be pulled through from either side of the

vehicle. Speed lay hose bed covers shall be red in color for vehicles painted Candy Apple Red.

For vehicles painted Desert Sand, speed lay hose bed covers shall be tan in color. Covers will be

secured by snap fasteners.

2.2.1.3 Hose board trays. The vehicle shall be equipped with two running board hose trays

located under discharge panels on both the driver and crew chief side. Each tray shall be

equipped with a mat and shall be designed to allow for proper drainage.

2.2.2 Suction hose.

2.2.2.1 Hard suction hose. Two 10 foot long, light weight 6-inch hard suction hoses, with 6-inch

National Hose thread long handle female couplers on one end and 6-inch National Hose thread

long handle male couplers on the other, shall be mounted on the vehicle above the left side

compartments. A suction strainer shall also be mounted on the vehicle. The hose and suction

strainer mounting system design shall be subject to approval by the procuring activity.