A-A-58003 Truck, Fire Fighting \(Structural, 4X2 Or 4X4\)This commercial item description \(CID\) covers a structural pumper truck. It has a 4x2 or 4x4 chassis; a diesel engine and automatic transmission; a cab to accommodate at least five seated persons with at least four doors; a 1,250 gallon per minute \(gpm\) fire pump; a 500 gallon minimum capacity water tank; utility equipment compartments; and fire hose. The structural pumper truck is intended to combat structural, wildland, urban interface, and similar type fires.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21

A-A-58003F

well as distribution, warning, handling and destruction statements on the cover / title

pages of the TO.

2.1.8.1.1 Operator's manuals. The operator's manual shall include all information required for

the safe and efficient operation of the vehicle, including the fire extinguishing equipment, and

any special attachments or auxiliary equipment. The operator's manual shall include at least the

following:

a. Location and function of all controls and instruments shall be illustrated and fully

described.

b. Safety information that is consistent with the safety standards established by the

Occupational Safety and Health Administration (OSHA).

c. Checks and adjustments in preparation for placing the vehicle for service upon receipt

from the contractor.

d. Preparation for shipment or storage.

e. Warranty information and period of the warranty for the complete vehicle and for any

component warranty that exceeds the warranty of the complete vehicle. Addresses and

telephone numbers shall be provided for all warranty providers.

f. General description of and step-by-step instructions for the operation of the vehicle and

its fire extinguishing system(s) and auxiliary equipment.

g. Description of the post-operational procedures (draining, flushing, et cetera).

h. Checklists for the daily maintenance inspection and mission readiness checks that the

operator is expected to perform.

i. Procedures for towing a disabled vehicle.

j. Schedules for required preventative maintenance and required periodic maintenance.

2.1.8.1.2 Service manuals. The service manual shall identify any special tools and test equipment

required and shall cover troubleshooting and maintenance as well as minor and major repair

procedures. T he text shall contain performance specifications, tolerances, and fluid capacities;

current, voltage, and resistance data; test procedures; and such illustrations and exploded views

as may be required to permit proper maintenance by qualified mechanics. The manual shall

contain an alphabetical subject index as well as a table of contents. The service manual shall

contain at least the following, where applicable:

a. Fire fighting system schematic(s).

b. Hydraulic schematic.

c. Pneumatic schematic.