A-A-58009B
2.1.7.1.2 Service manual. The service manual shall identify any special tools and test equipment
required and shall cover troubleshooting and maintenance as well as minor and major repair
procedures. The text shall contain performance specifications, tolerances, and fluid capacities;
current, voltage, and resistance data; test procedures; and such illustrations and exploded views
as may be required to permit proper maintenance by qualified mechanics. The manual shall
contain an alphabetical subject index as well as a table of contents. The service manual shall
contain at least the following, where applicable:
a. Hydraulic schematic.
b. Pneumatic schematic.
c. Electrical schematic.
d. Winterization schematic.
e. Schedules for required preventative maintenance and required periodic maintenance.
f. Location, procedure, and interval for parts of the truck and equipment which require
lubrication.
2.1.7.1.3 Parts manual. The parts manual shall include illustrations and exploded views, as
needed, to properly identify all parts, assemblies, subassemblies, and special equipment. All
components of assemblies shown in illustrations or exploded views shall be identified by
reference numbers which correspond to the reference numbers in the parts lists. All purchased
parts shall be cross-referenced with the original manufacturer's name and part number. The parts
identification manual shall provide the description, length, dimensions, and quantity of each item
used per vehicle. The manual shall contain a numerical index. The parts manual shall contain a
list of all of the component vendor names, addresses, and telephone numbers referenced in the
parts list.
2.1.7.2 Video tape. A product familiarization video tape shall be provided with each truck. The
tape shall verbally and visually provide all information required for operation and routine
inspection and maintenance of the vehicle and its components, using the manuals as a baseline.
An additional copy of the video tape shall be provided to the procuring activity.
2.1.8 Painting, plating, and corrosion control.
2.1.8.1 Dissimilar metals. Dissimilar metals, as defined in MIL-STD-889, shall not be used in
intimate contact with each other.
2.1.8.2 Finish. Exterior surfaces shall be prepared, primed, and painted with polyurethane paint
in accordance with all of the paint manufacturer's instructions and recommendations. Unless
otherwise specified (see 6.2), the exterior finish color shall be Candy Apple Red, Sikkens Color
Number FLNA3021, DuPont Color Number 97902U or 4737U, PPG Color Number 71528 (the
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business