MIL-DTL-24416 Extinguishing System, Fire, Fixed, Wet ChemicalThis specification covers requirements for pre-engineered wet chemical fixed fire extinguishing systems for protection of deep fat fryers, and doughnut fryers onboard U.S. Navy ships and submarines. The systems covered under this specification are intended for use in new applications, and for backfit into existing wet chemical extinguishing system installations. The current wet chemical extinguishing system utilizes aqueous potassium carbonate \(APC\) extinguishing agent, in a concentration of 42.4 percent K2CO3 and 52.8 percent water.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8

MIL-DTL-24416C(SH)

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-167-1

Mechanical Vibrations of Shipboard Equipment (Type I � Environmental

and Type II � Internally Excited)

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or

https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,

Philadelphia, PA 19111-5094.)

2.2.2 Other Government documents, drawings, and publications. The following other Government documents,

drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,

the issues of these documents are those cited in the solicitation or contract.

GENERAL SERVICES ADMINISTRATION (GSA)

General Services Administration (GSA) Global Supply Catalog

(Copies of this document are available from the GSA Centralized Mailing List Service (CMLS) by phone at

(817) 334-5215, by fax at (817) 334-5561, or online at www.gsa.gov.)

2.3 Non-Government publications. The following documents form a part of this document to the extent

specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or

contract.

ASME INTERNATIONAL

ASME Boiler and Pressure Vessel Code Section VIII

ASME B40.100 -

Pressure Gauges and Gauge Attachments - Part I - B40.1 Gauges: Pressure

Indicating Dial Type: Elastic Element (DoD adopted)

(Copies of these documents are available from ASME Service Center, 22 Law Drive, Box 2900, Fairfield, NJ

07007-2900 or online at www.asme.org.)

NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)

NFPA 17A

Standard for Wet Chemical Extinguishing Systems (DoD adopted)

NFPA 96

Standard for Ventilation Control and Fire Protection of Commercial Cooking

Operations (DoD adopted)

(Copies of these documents are available from NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471 or online

NCSL INTERNATIONAL

ANSI/NCSL Z540.1-1994

Calibration and Measurement and Test Equipment General

Requirements (DoD adopted)

(Copies of this document are available from NCSL International, 2995 Wilderness Place, Suite 107, Boulder,

CO 80301-5404 or online at www.ncsli.org.)

UNDERWRITERS LABORATORES INC. (UL)

UL 300

Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking

Equipment

(Copies of this document are available from COMM 2000, 1414 Brook Drive, Downers Grove, IL 60515 or

online at www.ul.com.)